Eyewear and AR companies often come to SFI with a sketch, a frame and a goal: a lens that darkens on demand. The hard part is not the idea. It is the path from a drawing to thousands of lenses that switch the same way. This guide shows how an LC film for eyewear goes from concept to a real project.
What to Bring to the First Call
A good first call needs five pieces of information. None of them has to be final.
Lens Drawing: A CAD file or a sketch of the lens outline and curvature.
Tint Targets: Clear and dark transmittance or the light conditions the product must handle.
Control Method: Light sensor, button, app or a fixed pattern such as strobing.
Power Budget: Battery size, charging method and whether a solar cell fits.
Volumes and Timing: Expected quantities and the launch date.
Many projects start with a rough frame and a clear goal. Our LC specification table helps set first targets for transmittance, speed and thickness.

Have a lens idea? Tell us about your product and we will reply with a dedicated plan. Start your LC lens project
The Steps From Concept to Production
Every LC eyewear project follows the same path. The details change with the product while the order of the steps stays the same.
1. Design Review and Formulation
We review the drawing and recommend an LC formulation by tint range and speed. GH formulations suit sunglasses, goggles and AR. TN suits strobe glasses that need a deep dark state.
2. Specifications and Samples
We send specifications and samples, so the team can test tint, clarity and color in its own frame before any tooling.
3. Custom Tooling (NRE)
Each lens outline needs its own masks, printing setup and tooling for the LC cells. This is the non-recurring engineering (NRE) cost.
4. Electronics
SFI can supply the flex connectors and the drive circuit, built to the customer's specifications. The driver links the film to a sensor, a button or an app.
5. Lamination and Forming
The film is laminated to polycarbonate, flat or with one or two-axis curves. Optional layers, such as anti-fog, are added at this stage.
6. Prototypes
Prototypes are made in small quantities in pre-serial production, then tested in the real product.
7. Production
After approval, the LC cells move to SFI's roll-to-roll production line, built for high volume at good yields. Development typically takes 8–12 weeks from design to production.
The clip below shows a large flexible visor cell under test in our lab. You can see more in our real sample videos.
What Drives Cost and Minimum Order
LC eyewear cost has a one-time part and a per-unit part. The table below shows what each one covers.
Cost Item | What It Covers |
|---|---|
NRE | Design work, masks, printing and tooling for the LC cells |
Unit cost | Film, lamination, assembly and testing |
Electronics | Driver, connectors, sensor and battery |
Options | Anti-fog and other added layers |
Unit cost depends on lens size, tint range, curvature and electronics. The minimum commercial order is 1,000 units. During development under NRE, prototypes and pilot lenses can be made in any quantity.
Protecting Your Design
Customers share drawings and product plans long before launch. SFI makes each LC cell to the customer's design and does not show customer products in its marketing. On this site you will only see stock images and lab samples with no names or logos.
Where These Projects End Up
The same process serves very different products. These are the main ones today.
AR Glasses: Dimming layers that keep the display readable outdoors, as in our AR smart glasses application.
Strobe Glasses: Fast shutters for sports and rehabilitation, as in our strobe training eyewear.
Sunglasses: Lenses that darken on demand, covered in smart LC sunglasses.
Ski Goggles: One lens for sun and flat light, covered in buying ski goggles.
Helmets: Auto-dimming visors that adjust in 0.1 seconds.
Limits to Plan For
The film cannot be cut after production, so a change in the lens outline means new tooling. The film follows cylindrical curves and SFI can laminate it to one or two-axis curves. Very deep 3D shapes are not possible. Commercial sizes go up to 24″ × 24″ (610 × 610 mm). Each step needs the customer's input and approval, so a late decision moves the timeline.
Ready to start your LC eyewear project? Send us your drawing and targets and we will reply with a dedicated plan. Contact our LC team
FAQ
What Do I Need to Start an LC Eyewear Project?
A lens drawing, tint targets, a control method, a power budget and expected volumes. None of them has to be final.
How Long Does It Take From Design to Production?
Typically 8–12 weeks.
What is NRE and Why is It Needed?
NRE covers the masks, printing and tooling made for your LC cells. Each lens outline needs its own set.
What is the Minimum Order Quantity?
1,000 units for commercial production. During development under NRE, any quantity can be made.
Does SFI Supply the Electronics?
Yes. SFI can supply the flex connectors and the drive circuit, built to your specifications.
Can the Film Be Laminated to a Curved Lens?
Yes. SFI laminates flexible LC film to polycarbonate, flat or with one or two-axis curves.
Can SFI Send Samples Before Tooling?
Yes. We send specifications and samples, so you can test the tint in your own frame.
Can the Film Be Cut to a New Shape Later?
No. The liquid crystal is sealed inside the cell, so each lens outline is made to size.
Will My Product Appear on SFI's Website?
No. SFI does not show customer products. The site uses stock images and lab samples only.
Related Articles


